AIM Sports Inc FN/FAL M-LOK 2pc Drop-In Universal Handguard

6 reviews for AIM Sports Inc FN/FAL M-LOK 2pc Drop-In Universal Handguard

1. 

   Jason l – April 16, 2022

   First off, lets get the big one out of the way, and why I knocked off one star. You WILL loose your bipod. It absolutely does not fit with this handrail. But to me, ounces is pounds and pounds equal pain. So taking it off was no big deal.Onto the rail. Its stout. Its nicely made. I'm not super picky but upon inspection I didn't see any major tooling marks or anything like that.Installation. Went right on. For a minute I was a tad confused because it initially looked like after you slide it into the circular piece that holds the back in that you can't get it(upward) over the barrel and where it is suppose to sit. Just put some elbow grease into it. A little squeeze and it bends over the barrel hump and goes right into place. If I knew that tid bit when I got this installation would have literally taking less than two minutes. And most of that is putting the six screws in the top cover.Speaking of that, how awesome is it that you get two choices for a top cover?! Honestly, with how many FAL's there are out there I'm shocked this isn't on most of them. IMO, if you want to hang accessories (ones you actually need, don't be hanging garbage off your gun), OR you just want a cool, modern look, this is the rail for you.

2. 

   Joseph Pasciotty – April 16, 2022

   Because of the design , there’s slight movement in the front end when mounted . This is on a DS Arms STG58 . To me , it’s an AirSoft piece . Spacing at the rear of the piece will fit the bipod when folded down , but it doesn’t alleviate the movement . If a scope is mounted spanning the receiver mounted picatinny and forend mounted picatinny , there’s unacceptable movement of the optic .

3. 

   Tyler4500 – July 2, 2022

   Installed this handguard on my imbel parts kit FAL built back in 2001. Pretty well machined and very good aesthetics. A few minor machine marks in some pretty unnoticeable areas, but overall a very nice finish. Had to do some minor dremel work on the handguard assembly cap to get the cross-bolt to thread through on the front of the handguard. My assembly cap looked slightly bent and out of alignment prior to installation, so it could very well have been due to that OEM part and not the actual specs on the rail. It fits extremely securely with absolutely no movement in either the lower of upper half of the handguard. Mlok is all in spec and zero issues with attaching accessories. I also prefer the top piece with no pic rail, as it feel excellent in hand. It looks outstanding after being installed and I am very pleased and would recommend highly recommend, especially at this price point.Is the DSA handguard nicer? Yes. Is it $200 nicer…absolutely not!

4. 

   Bobby – May 2, 2023

   Looks great and fits tight with no slop or movement. Good value for the money. Gets a little hot with some rounds so you might want to wear gloves. I don’t know what else to say. My review supposedly isn’t long enough.

5. 

   Nick – July 15, 2023

   I had to modify it to fit. The half circle on the rar was too long and had to take the corners off the inside rear where the top bolts down to slide past the barrel taper. After that great finish and feel to the part. Do not reccomend if you dont have a bench sander and a dremel

6. 

   Harry – December 24, 2023

   Long AIM M-LOK Handguard on metric Imbel FN FAL. Bipod cut imbel barrel. Easy install, 3 minutes tops, maybe a little tight, but on the other hand that made it rock solid once I got it in place. My old plastic hand guard was wobbly no matter what. This has more grip, feels solid and of course add the extra rail and mlok abilities. One downside is that if youre using the DSA pic rail above the upper receiver the rails don't quite match up in height. The DSA rail is about 3mm taller. After market to after market I didnt expect them to be perfect and I doubt anyone but myself will ever notice.