This 5.56 NATO chambered Cold Hammer Forged barrel is machined from CrMoV steel with a manganese phosphate finish and chrome lined bore. Our limited run of Cold Hammer Forged barrels feature an M4 Feed Ramp Extension and are HP and MPI tested. Hanson Series Barrels feature our proprietary BA Hanson profile and include a pinned lo-pro gas block. Hanson barrels are not designed to work with aftermarket piston kits. All NFA/ATF Rules Apply You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm. Specifications for Ballistic Advantage 5.56x45mm NATO Hanson Cold Hammer Forged Threaded Barrel w/ Lo Pro: Manufacturer: Ballistic Advantage Finish: Phosphate Fabric/Material: Chrome Moly Vanadium Barrel Profile: Hanson Gas Block Journal Size-Diameter: .750 in Threads per Inch: 1/2×28 Barrel Twist Rate: 1-7 Flutes: No Gun Make: AR Platform Gun Model: AR-15 Package Contents: Ballistic Advantage 5.56x45mm NATO Hanson Cold Hammer Forged Threaded Barrel w/ Lo Pro
1 review for Ballistic Advantage 5.56x45mm NATO Hanson Cold Hammer Forged Threaded Barrel w/ Lo Pro
Only logged in customers who have purchased this product may leave a review.
Related products
Ballistic Advantage
Ballistic Advantage 5.56 x 45mm Hbar Profile Classic Series Chrome Lined Barrel
Ballistic Advantage
Ballistic Advantage Performance Series .350 Legend Threaded Barrel
Ballistic Advantage
Ballistic Advantage
Ballistic Advantage
Ballistic Advantage
Ballistic Advantage Performance Series 5.56 AR Rifle Barrels
Ballistic Advantage
Ballistic Advantage BA Hanson Profile .308 Winchester Barrel Threaded
Ballistic Advantage
Al –
I've ordered two for these new Hanson CHF Chrome-Lined barrels now – one direct from BA and the other via OP, and nI've returned BOTH of them. The barrel extension is ~.015 shorter on these than their standard Hanson barrels, that or the indexing pin at 12 o'clock is further out. Either way, the barrel does not seat fully into the receiver extension so that the feedramps line up. I verified this with a regular Hanson (fit was ideal and I know that rifle runs because I had shot it plenty before considering switching to the CHF), unlike the new CHF Hanson. Same receiver, different fitment. I contacted BA with pictures and measurements and they just gave me a RMA with no explanation for their lack of QC and measurement differences. That was in Spring when they first released these barrels. My feeling is now that they've pushed these barrels to their retailers and will let them deal with the fall-out of a barrel that is not up to spec!! Shame on you BA – and at the same time, par for the course with a lot of manufacturers today, unfortunately. Am going to pay more $ for piece of mind and a known track record of QC; I ordered a Criterion Core barrel instead.Bottom line, I can't recommend this barrel. Though, if you plan to true your upper receiver face, then maybe you can line up feedramps and verify head-space is correct. Either way be warned!