Features/Specifications: 1.35 inch Inner Diameter. Mil-Spec Hardcoat Anodize. 7075 Barrel nut w/Hardcoat Anodize. Free Floating Design. 4 QD swivel sockets. 7-sided handguard design. MLOK at 3, 6, 9 o’clock and all 4 corners. Dual Wedge mounting system. Billet Anti Rotation Insert. Anti Slip Design. Barrel nut wrench INCLUDED. Included Accessories: Barrel Nut Barrel Nut Wrench Hardware Specifications for SLR ION Ultra Lite M-LOK 5.56 Handguard: Manufacturer: SLR Color: Black Finish: Melonite Fabric/Material: Aluminum Alloy Gun Make: AR Platform Gun Model: AR-15 Gun Type: Rifle Gun Rail: Picatinny Condition: New Included Accessories: Anti-rotation Insert, Wedge Set, Barrel Nut Mount Type: M-LOK Quantity: 1 Features of SLR ION Ultra Lite M-LOK 5.56 Handguard: 1.35 inch Inner Diameter. Mil-Spec Hardcoat Anodize. 7075 Barrel nut w/Hardcoat Anodize. Free Floating Design. 4 QD swivel sockets. 7-sided handguard design. MLOK at 3 6 9 o’clock and all 4 corners. Dual Wedge mounting system. Billet Anti Rotation Insert. Anti Slip Design. Barrel nut wrench INCLUDED. Included Accessories: Barrel Nut Barrel Nut Wrench Hardware Package Contents: SLR ION Ultra Lite M-LOK 5.56 Handguard
5 reviews for SLR ION Ultra Lite M-LOK 5.56 Handguard
Only logged in customers who have purchased this product may leave a review.
Munky.Topado –
I got the 11.7" handguard for a 12.5" barrel. The fit is perfect, it leaves just enough room to (un)install a muzzle device. I don't have a suppressor or linear comp but I imagine they'd sit close to flush with the handguard.Installing is mostly easy. The handguard fits very tight over the barrel nut, you might want to add some oil to the outside of the barrel nut and the inside of the handguard. I had to use some padding and lightly hammer it in from the front of the handguard. I then used a picatinni mount I had and tightened it down while it was seated over both the receiver and the handguard rails, which forced them into alignment.Finish is great, looks really good and clean.
Joe –
There is another review on here that makes no sense. The reviewer says it looks cheap & would recommend?????? Okay man if you say. In any case it matched my Spikes Billet Upper & Lower it looks clean! Super light colors match perfectly. It is literally one of the nicest hand guards I have seen. Pica-tinny removed where it's not needed to reduce weight. Every aspect was taken into consideration when they designed it. In any case to each their own but I felt like I needed to leave a review that was about the item & not another manufacturers (which is not near this quality). I would definitely use their product in any future builds! They look amazing and have enough M Lok & QD sling ports! I don't know I loved it.
Pierce –
I purchased the 11.7” and I couldn’t be happier. The finish on it is a flat black matte finish. It comes with everything anti rotation tabs and a wrench adapter for install. When installing I’d recommend putting some aeroshell or grease on the inside of the hand guard and the barrel nut. It’s a tight fit without grease so just a heads up. If you’re looking for a ultra high quality lightweight hand guard this is the one.
J –
Not nearly as nice as the midwest industries handguards.. more expensive even.. but the slr's have perfect length options that really make for an attractive looking gun. The finish is glossy… much like the cheap flimsy handguards.. it does not feel like a $200 piece. Don't get me wrong.. it's still an excellent handguard.. if you're looking for something different.. try the slr.. but I would suggest the midwest industries handguards.
Aharren –
Tight fit, good grip, nice and slim. Solid piece from SLR.